Talk with Shengqi About Your Filtration Requirement

Choose Your Contact Route

Use the route that best matches your request. A new equipment enquiry needs slurry and process information; a replacement enquiry needs identification and measurements; a project or distribution discussion needs company and site context.

If you are not sure which route fits, send a short description with the material, current equipment, and your goal. Technical fields can be marked Not Sure on the enquiry form. Do not guess a model from a photograph alone: the final recommendation depends on the actual material, operating conditions, plate or cloth dimensions, and required process result.

• Equipment selection: discuss a new filter press, feed arrangement, automation scope, or a dewatering system.
• Replacement plates and cloths: provide the equipment nameplate, clear photographs, dimensions, hole positions, sealing details, and operating conditions.
• Project cooperation: introduce your company, country, role, installation or maintenance capability, and the products or systems you want to discuss.
• Direct contact: reach Andy on WhatsApp at +86 15116183980 or email lkvicky2003@gmail.com.

What to Prepare Before Sending an Enquiry

A clear, limited information set is more useful than an unlabelled collection of files. For equipment selection, describe the slurry and the result you need: filtration, cake handling, filtrate reuse, cake washing, or another defined process objective. Keep wet material quantity separate from dry-solids quantity, and identify whether a stated pressure means feed pressure, membrane squeeze pressure, or hydraulic-system pressure.

For a replacement part, photograph the part in good light with a ruler or known scale where possible. Include the nameplate and both sides of the plate or cloth. Measurements and photographs support review; they do not by themselves establish pressure, capacity, cake moisture, service life, delivery timing, or suitability for an untested material.

• Use descriptive filenames and identify the equipment, part, and view in each photograph.
• Attach drawings or sample photographs when hole positions, sealing, handles, ports, or cloth fixing cannot be measured reliably.
• State the operating temperature, pH, abrasive or corrosive conditions, and any material-contact requirement when known.
• Explain what is changing: original replacement, fit correction, cloth life investigation, filtrate quality, cake release, or a new process target.

How Enquiries Move Forward

The contact page is an entry point, not a substitute for process confirmation. After receiving the basic request, the appropriate next step may be equipment selection, a measurement review, a sample or slurry testing discussion, or a system interface review. Where information is missing, the selection list will identify what must be confirmed rather than fill the gap with an assumed specification.

For a system discussion, separate the press scope from site responsibilities such as feed, polymer preparation where applicable, filtrate routing, cake discharge, utilities, civil works, controls, and commissioning. A system page explains module connections and interfaces; an application page explains the material and selection evidence needed.

Direct Contact Details

Company: Shandong Shengqi Environmental Protection Equipment Co., Ltd. Contact: Andy. WhatsApp: +86 15116183980. Email: lkvicky2003@gmail.com.

For urgent safety or operating questions, stop the relevant equipment using the site procedure and keep people clear of moving parts, pressure, and electrical hazards. Never open a press under pressure, perform electrical work while energised, or bypass an interlock. Contact the responsible site technician before inspection or maintenance.

• Use Request a Quote for a structured equipment, replacement, or cooperation enquiry.
• Use the measurement guide when you need a field checklist for plates or cloths.
• Use the testing and sizing services when the material or process evidence is not yet sufficient for selection.